BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Can i turn off the C7000 enclosure insight display ?

Simon Gao
Occasional Advisor

Can i turn off the C7000 enclosure insight display ?

After finished setting up the C7000 blade system. Under the normal running staus, the insight display screen always flashing. Can i turn it off?

1 REPLY
Murali_V
HPE Pro

Re: Can I turn off the C7000 enclosure insight display ?

Hello Simon, 

 

Following are the Insight display Light status, to identity the issue: 

 

If the Insight Display background color is amber and the screen is flashing, then an error exists and further action is required. To view the suggested corrective action, select Fix on the Device Error screen.

 

If the Insight Display background color is blue, then the enclosure UID is active. The enclosure UID color overrides the green or amber colors. When the Insight Display background color is blue, always check the health icon in the corner of the screen for the overall system health status.

 

And, if the Insight Display background color is green, then the enclosure is operating normally and has no errors. No further action is required.

 

If required refer the HP BladeSystem c-Class Enclosure Troubleshooting Guide.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01215727/c01215727.pdf

 

Regards, 

Murali_V

Was this post useful? - You may click the KUDOS! thumb below to say thank you...