HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot connect HP VC to SAN

 
GSUK
Occasional Visitor

Cannot connect HP VC to SAN

Hi,

I've got 2 HP VC 8GB 24-port FC Modules in Bays 3 & 4 in a c7000 chassis.

I can create the fabrics but I cannot get the switch to talk to my SAN. Connector Status = NOT-LOGGED-IN. Everything on the SAN looks ok.

All advice welcome.

Thanks,
Glenn
4 REPLIES
Benoy Daniel
Trusted Contributor

Re: Cannot connect HP VC to SAN

Please reseat the fibre cable at VC side.
JKytsi
Honored Contributor

Re: Cannot connect HP VC to SAN

And what is this "SAN" You are connecting ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Adrian Clint
Honored Contributor

Re: Cannot connect HP VC to SAN

NPIV enabled on the SAN switch ports?
GSUK
Occasional Visitor

Re: Cannot connect HP VC to SAN

Found the fault. Despite the engineer telling me the fibre was plugged in to port 1, it was infact plugged in to port 3! I re-assinged the SAN Fabric to port 3 and it all now works :)