HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Capture Firmware versions

 
SOLVED
Go to solution
Gene Kenny
Regular Advisor

Capture Firmware versions

Hello

 

Is there a command or commands that will capture the current firmware of all the components  in the C7000 enclosure and blades?

 

Thanks

 

 

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Capture Firmware versions

The enclosure firmware page will show you most firmware versions, "show all" from OA CLI does the same, you can even use EFM (boot from SPP) to list more details about Proliant blades.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Solution

Re: Capture Firmware versions

The following document details how to generate the show all report from the c-Class enclosure:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=4017943&prodTypeId=3709945&objectID=c02843807

 

Once done, save it as a text file and review it to find the firmware components :

 

  • OA firmware
  • Interconnect modules firmware
  • Blades BIOS version
  • Blades iLO version etc.

 

 

 

Regards,

 

Vijayasarathy

I work for HPE
Views expressed herein are my personal opinion and is not the views of HPE
To say thanks click the white "thumbs up" icon below!!!