HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Comparision->HR DL585 G5 vs BL465 G5 Blades

 

Comparision->HR DL585 G5 vs BL465 G5 Blades

We run a 3 node active SQL Cluster for our ERP system currently on 3-DL580 G2's. We are going to replace these with the above BL Blades. Would there be much of a performance hit not choosing the 585's? The Blades would be quad core vs the current 580 G2 Quad Procs.

Appreciate feedback
1 REPLY
WFHC-WI
Honored Contributor

Re: Comparision->HR DL585 G5 vs BL465 G5 Blades

I would expect the performance to be better on these BL465s. Although you are limited to two processor sockets, your supported number of cores actually goes up over the DL585 G2.

You have only 8 memory slots per BL465 compared to 32 for the big box though...

I might consider waiting for the G6 model. There are more memory slots in these. Using BL680s is also an option.

Good luck!