HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Concern with Brocade 8GB Switch for C-Class

 
SOLVED
Go to solution
cparvin
Occasional Visitor

Concern with Brocade 8GB Switch for C-Class

Hello,

 

We're building ISLs to another set of fabric switches, and one of the free ports in the C7000 Brocade SAN switches we have to do this is port 0. My customer is concerned that this is a reserved or 'system' port, but In my experience this port can be used for anything it is licensed for. Is that correct? No need to worry with using Port 0 on the Broade 8GB SAN switches?

 

THanks,

Chris

2 REPLIES
chuckk281
Trusted Contributor
Solution

Re: Concern with Brocade 8GB Switch for C-Class

It is just another port. Not reserved.

cparvin
Occasional Visitor

Re: Concern with Brocade 8GB Switch for C-Class

Thanks, I thought as much, but wanted to verify.

Chris