BladeSystem - General
1747988 Members
4819 Online
108756 Solutions
New Discussion юеВ

Re: Configuration of 3020

 
Grayh
Trusted Contributor

Configuration of 3020

Hi All,

Now I find it difficult to configure the 3020 cisco blade switch..

However I configure i have the following on the Onboard Administrator.. I have read the user guide 3020 cisco for blade servers..

Interconnect
Bay Port Port Status Device Bay Server Mezzanine Slot Server Mezzanine Port Device ID
1 No connection
2 No connection
3 No connection
4 No connection
5 No connection
6 No connection
7 No connection
8 No connection
9 No connection
10 No connection
11 No connection
12 No connection
13 No connection
14 No connection
15 No connection
16 No connection

Product Name Cisco Catalyst Blade Switch 3020 for HP
Management IP Address Unknown
Management URL http://0.0.0.0 <-------
User Assigned Name hp
Part Number WS-CBS3020-HPQ
Spare Part Number 432904-001
Serial Number FOC4445U0U4
Type Ethernet
Manufacturer Cisco Systems, Inc.
Temperature Sensor Absent

Connectivity JS2 Connector Absent
Internal Ethernet Interface to OA Present
Internal Ethernet Route to OA Enabled
Internal Serial Interface to OA Absent
Internal Serial Route to OA Disabled
Serial Port Baud Rate 9600
External Serial Port Interface Present
External Ethernet Interface Absent
3 REPLIES 3
Grayh
Trusted Contributor

Re: Configuration of 3020

I was thinking if it is possible to get the configuration script containing the settings for the Blade enclosure
Raghuarch
Honored Contributor

Re: Configuration of 3020

Hi Grayh,

There is a screen in OA GUI.Configuration scripts: you can save the configuration of Enclosure. using the same.

Please refer to page 85 of the below link:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf

Grayh
Trusted Contributor

Re: Configuration of 3020

thank u