HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring Flex-10

 
Gene Kenny
Regular Advisor

Configuring Flex-10

Hello

I am setting up my first Flex-10. I create a 4 networks and I adjust the speed of each nic under the advance tab. When I go to server profiles I only see Lom1:a Bay 1 and Lom2:a bay2. I do not see the other 6 nics. I do see the nics in the device information tab. The VC firmware is at 2.10.

Thanks,
5 REPLIES
JKytsi
Honored Contributor

Re: Configuring Flex-10

For starters ...You are using factory default MAC addresses and VC isn't a VC with those.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Gene Kenny
Regular Advisor

Re: Configuring Flex-10

Thanks, I changed the the mac addresses to HP defined and I am still seeing only the two nics, under server profile. I do see all the nics under the server information tab on the OA
David Claypool
Honored Contributor

Re: Configuring Flex-10

What exact blade server model has this profile been assigned to?
Gene Kenny
Regular Advisor

Re: Configuring Flex-10

The blade is a BL460C G6 sing the NC373i nic
raadek
Honored Contributor

Re: Configuring Flex-10

I vaguely remember it always displays just 4 connections initially (for whatever reason).

Simply clicking "Add network connection" should solve it though.
Don't panic! [THGTTG]