HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring Trunk Ports in HP BLc Bnt 1GbE2

 
Aamir Majeed
Advisor

Configuring Trunk Ports in HP BLc Bnt 1GbE2

Hello,
I want to install two HP BLc Bnt 1GbE2 Switches in c 7000 enclosure, I have configured Uplink Ports 17 and 18 in Trunk group 1.
Similarly Uplink ports 20,21 and 22,23 for both the switches are configured to 4 trunk groups. Now after configuring these trunk groups I have 4 Uplink Trunks of 2Gb/s each. Now how can I acheive redundancy? i.e. if one trunk group is failed then How the whole traffic will be routed to second trunk on that switch.