HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring uplinks with CX4 ports on Virtual Connect 1/10Gb Ethernet module

 
A.W.R
Frequent Advisor

Configuring uplinks with CX4 ports on Virtual Connect 1/10Gb Ethernet module

Hi,

We have a Blade System Chassis with 2 by Virtual Connect 1/10Gb Ethernet modules. Each ethernet module has 2 by 10Gb CX4 uplink ports.

Is it possible to configure each CX4 uplink port to connect to a different network, or do the ports have to be connected redundantly i.e. port 1 switch 1 to network A, port 1 switch 2 to network A etc.?

Thanks
Andrew
1 REPLY
HEM_2
Honored Contributor

Re: Configuring uplinks with CX4 ports on Virtual Connect 1/10Gb Ethernet module

Andrew:

the 10GB CX4 uplinks on Virtual Connect are independent switch ports and can be connected to different networks. They do not have to be connected redundantly.