HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Connect to server Serial via OA SSH

 
lipinski
Occasional Collector

Connect to server Serial via OA SSH

I'm trying to connect to the console of a blade by ssh-ing to the OA.  This does not seem to work.

 

For example, I can ssh to the OA, login, and then execute 'connect server serial 3', and get a console.

 

However, I cannot:

ssh $OA_IP connect server serial 3

 

This causes the console to be setup and immediately torn down:

 

Starting virtual serial port.
Press 'ESC (' to return to the CLI Session.
HP BladeSystem Onboard Administrator
(C) Copyright 2006-2011 Hewlett-Packard Development Company, L.P.

hpbc001-0-0-OA2 [SCRIPT MODE]> connect server serial 3


Connecting to bay 3 ...

Connection terminated by user's session.


hpbc001-0-0-OA2 [SCRIPT MODE]>
connect server serial 3

Any ideas on how this can be done?