BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Connecting to blade problem

 
AGalkin
Collector

Connecting to blade problem

When i trying to connect a blade using KVM I get this error.

"Could not Connect Error (0x5) Wait a few seconds and try again"

I have incorrect static IP address in iLO settings (0.0.0.0), how can i reset it to DHCP??? I also try change position junpers (clear nvram..) on blade but it didn't help me.

Command "reset server <bay>" also didn't solve the problem.

Command "connect server <bay>" I get error "Invalid MP IP Address: 0.0.0.0".

BladeSystem c7000.

3 REPLIES
peyrache
Respected Contributor

Re: Connecting to blade problem

F8 during powerup to access ilo parameters
JY
AGalkin
Collector

Re: Connecting to blade problem

"When i trying to connect a blade using KVM I get this error.

"Could not Connect Error (0x5) Wait a few seconds and try again"" 

msh_it
Regular Advisor

Re: Connecting to blade problem

Using the adapter shipped with the blade enclosure, you can connect a screen and keyboard directly to the server. then use F8 to reset iLO IP

-------------------------------

msh_it | UAE | AbuDhabi

If you feel this was helpful please click the KUDOS! Below!