BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Convert a c7000 enclosure from DC to AC power

chuckk281
Trusted Contributor

Convert a c7000 enclosure from DC to AC power

A customer question from Keith:

 

***********

 

Customer needs to convert existing c7000 from DC to AC power.  Power module and power supplies need to be replaced.  Anything else?

 

*********

 

Reply from Chris:

 

************

 

You will need to set the enclosure PDU_type

 

 

SET ENCLOSURE PDU_TYPE

  • Command:

SET ENCLOSURE PDU_TYPE {1|2|3|4|5}

  • Description:

Sets the enclosure PDU type to:

o 1=Single-phase

o 2=Three-phase

o 3=Three-phase, international

o 4=DC Power Input Module

Enclosure management commands 128

o 5=Single phase IPD

  • Access level/Bay level:

OA administrator

  • Restrictions:

1, 2, 3, 4, 5

 

***************

 

Comments?