HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Could not connect to EVA 4400 about VC-FC and Brocade 4/32b Switch

 
ssiegmund_1
Advisor

Could not connect to EVA 4400 about VC-FC and Brocade 4/32b Switch

Hallo I have 2 C7000 Enclosure with 2 VC-Enet and 2 VC-FC Module.
I could not connect to the presented LUN from the EVA 4400, with a standalone server it works fine. I thing the Command view can't see the virtuell WWN. The FC-Switch present the virtuell WWN and Virt. Manager displayed the Server-Bay Uplink login.
- FW OA : 2.25
- FW VC-Manager: 1.32
- FW VC-FC: 1.21
- OS Brocade 6.1.1a
- NPIV is enable
5 REPLIES
JKytsi
Honored Contributor

Re: Could not connect to EVA 4400 about VC-FC and Brocade 4/32b Switch

check from your server FC card BIOS (CTRL+Q in post) does it see the eva controllers (scan for storage devices)

IF not ...then edit the HBA settings to point to point only.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00874480〈=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351

And scan for storage devices again.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
ssiegmund_1
Advisor

Re: Could not connect to EVA 4400 about VC-FC and Brocade 4/32b Switch

Yes have tested all settings. P2P only - and Loop preferred than P2P. When I scan the Server hangs.
JKytsi
Honored Contributor

Re: Could not connect to EVA 4400 about VC-FC and Brocade 4/32b Switch

so how is your zoning then ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
ssiegmund_1
Advisor

Re: Could not connect to EVA 4400 about VC-FC and Brocade 4/32b Switch

Thank you, I have resolved the problem.
FW Update from the Qlogic Mezzanine Board.
JKytsi
Honored Contributor

Re: Could not connect to EVA 4400 about VC-FC and Brocade 4/32b Switch

Good ...I assumed that you had supported BIOS on FC HBA by looking your VC firmwares.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi