BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

DVD disconnected up in iLO DVD

blade centre
Occasional Visitor

DVD disconnected up in iLO DVD

I had an issue where I lost my ability to mount the usb DVD in the blade enclosure. It used to work, but it is gone all together. When I select a blade and go into virtual devices it show disconnected. I tried to use the standby iLO DVD and it doesn't show up. I have since reverted back. I checked all the cords and connections with no success. The LCD screen on the front of the enclosure shows show a "!". Is there some thing else I can try to see the usb dvd from the enclosure?
5 REPLIES
The Brit
Honored Contributor

Re: DVD disconnected up in iLO DVD

Just one thought. Make sure there is media in the DVD drive. The DVD will not be available to assign if there is no media in the drive.

Dave.
blade centre
Occasional Visitor

Re: DVD disconnected up in iLO DVD

I have tried a few different cd/dvd's? No dice.
Ron Burke
Advisor

Re: DVD disconnected up in iLO DVD

Try reseating the OA? The ILO CD\DVD works when connecting to an individual blade?
blade centre
Occasional Visitor

Re: DVD disconnected up in iLO DVD

I tried reseating the OA, and I just updated the firmware to 2.41 today as well. Still nothing.
Ron Burke
Advisor

Re: DVD disconnected up in iLO DVD

Sometimes you have to reseat the entire bay that the OA is sitting in. There is a burgundy release handle that will pull the entire bay out (not just the OA). So - if you have 2 OAs, the bay would pull both OAs out at the same time.