BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Device is reporting an internal degraded status

 
Highlighted
Occasional Contributor

Device is reporting an internal degraded status

I am getting degraded  error in two of my blade servers

IML logs

Main Memory  01/06/2020   10:37   01/06/2020  10:37   1   Corrected Memory Error threshold exceeded ((Processor 2, Memory Module 8))
Rack Infrastructure  01/08/2020   14:59   01/08/2020  14:42  2  Chassis Enclosure Serial Number CZ3321EPAC requires minimum firmware revision 03.50. It is currently 04.40.

 

3 REPLIES 3
Highlighted
Acclaimed Contributor

Re: Device is reporting an internal degraded status

replace the specified Dimm module.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Occasional Contributor

Re: Device is reporting an internal degraded status

Hello,

Thank you for the update.

I don't have much idea about Hardware inside blade system

1) Is Dimm is same as that of RAM,? Can I replace it from another server from the same blade system?

2) If I replace DIMM the data inside the server will be lost?

 

Highlighted
Acclaimed Contributor

Re: Device is reporting an internal degraded status

Consider to open a HPE support case to get it repaired.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!