Does LOM1 and LOM2 Share a Single 16Gbps Bus?

[Nima Gh.]

Does LOM1 and LOM2 Share a Single 16Gbps Bus?
and on the other hand, Does Each LOM share a Single Bus for Send and Receive?

[WFHC-WI]

hi Nima,

The bus inside of the enclosure for this transmission is 10Gbps per LOM, per direction.

LOM1 Tx - 10Gbps
LOM1 Rx - 10Gbps
LOM2 Tx - 10Gbps
LOM2 Rx - 10Gbps

source:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00810839/c00810839.pdf

Page 11

good luck, if you appreciate the answers we appreciate the points!

[David Claypool · Accepted solution]

There are no buses in the midplane. Each signal has a dedicated trace from the origin at the blade to the interconnect bay.

[Nima Gh.]

Thank You! I corrected my question and started a new thread: http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1447807