BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Does LOM1 and LOM2 Share a Single 16Gbps Bus?

SOLVED
Go to solution
Nima Gh.
Regular Advisor

Does LOM1 and LOM2 Share a Single 16Gbps Bus?

Does LOM1 and LOM2 Share a Single 16Gbps Bus?
and on the other hand, Does Each LOM share a Single Bus for Send and Receive?
3 REPLIES
WFHC-WI
Honored Contributor

Re: Does LOM1 and LOM2 Share a Single 16Gbps Bus?

hi Nima,

The bus inside of the enclosure for this transmission is 10Gbps per LOM, per direction.

LOM1 Tx - 10Gbps
LOM1 Rx - 10Gbps
LOM2 Tx - 10Gbps
LOM2 Rx - 10Gbps

source:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00810839/c00810839.pdf

Page 11

good luck, if you appreciate the answers we appreciate the points!
David Claypool
Honored Contributor
Solution

Re: Does LOM1 and LOM2 Share a Single 16Gbps Bus?

There are no buses in the midplane. Each signal has a dedicated trace from the origin at the blade to the interconnect bay.
Nima Gh.
Regular Advisor

Re: Does LOM1 and LOM2 Share a Single 16Gbps Bus?

Thank You! I corrected my question and started a new thread: http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1447807