HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Dynamic Processor Resiliency on Blade 870c

 
abdul_aziz
Occasional Visitor

Dynamic Processor Resiliency on Blade 870c

We have a case reported to HP regarding our server HP integrity Blade 870c. After checked by engineer, the report mentioned the crash because of error on CPU 0. From product information of Blade 870c (http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/3709945-3709945-3710102-1146345-3722789-3676868.html), it says that Dynamic Processor Resiliency able to de-allocate CPUs, online, any processor that exhibits an unacceptable level of correctable errors. My questions are:
1. Whether any processor means except CPU 0
2. Whether member of this forum has similar experienced also?

Thanks!
5 REPLIES
Benoy Daniel
Trusted Contributor

Re: Dynamic Processor Resiliency on Blade 870c

yes.. it is CPU0
abdul_aziz
Occasional Visitor

Re: Dynamic Processor Resiliency on Blade 870c

Hi Benoy, just want to clarify so basically DPR works except in CPU 0? eventhough it says in website works on any processor?
Thanks
Benoy Daniel
Trusted Contributor

Re: Dynamic Processor Resiliency on Blade 870c

I mean as you mentioned above the engineer said it is CPU 0 is defective.. DPR should support all processor in the system.


abdul_aziz
Occasional Visitor

Re: Dynamic Processor Resiliency on Blade 870c

Thanks for your reply.
abdul_aziz
Occasional Visitor

Re: Dynamic Processor Resiliency on Blade 870c

Partially solved