BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

EBIPA cannot change current address of some ilos!

SOLVED
Go to solution
Nima Gh.
Regular Advisor

EBIPA cannot change current address of some ilos!

for a c7000 enclosure, when I use EBIPA to set new IP Addresses and there are no effects, I just unplug and re-plug the chassis and everything goes well! But a couple of ilos remain unchanged! How can I fix this?
4 REPLIES
Cederberg
Honored Contributor

Re: EBIPA cannot change current address of some ilos!

Hi.

Have you checked that the ILO's that is not taking the change have dhcp enabled under network settings. If they don't they wouldn't take the changes you make to the EBIPA.

Regards.

//Cederberg
Nima Gh.
Regular Advisor

Re: EBIPA cannot change current address of some ilos!

The only place that I can set the dhcp mode is Enclosure Bay IP Addressing section, that which affects the whole chassis and not one server! Would you please tell me the exact place you mean to change the DHCP settings?
cjb_1
Trusted Contributor
Solution

Re: EBIPA cannot change current address of some ilos!

In the ilo itself > administration > network settings.

If you disable dhcp here you can setting an ilo address which i believe overrides EBIPA?
Nima Gh.
Regular Advisor

Re: EBIPA cannot change current address of some ilos!

Thanks!