BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter

 
SOLVED
Go to solution
Ariel Cidro
Occasional Contributor

Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter

Im planning to purchase a HP ProLiant BL460c G6 Server series (507780-B21). I notice that the network interface of the G6 is now Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter. Our bladesystem enclosure is C3000 and it only have an HP 1Gb Ethernet Pass-Thru Module for its network interface. Do i need another module for my C3000 for the G6 server's Flex-10 10GbE Multifunction Server Adapter to work? Im really not familiar with the new Flex-10 since my blade server are G5 series with 2 embedded single port NC373i Multifunction Gigabit Server Adapters. Please help. Thanks.
3 REPLIES
JKytsi
Honored Contributor
Solution

Re: Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter

Hi,

If You want to use FLEX-10 features, You need a FLEX-10 Virtual Connect -module(s).

You can still use it as a normal 1Gb LAN interface with your pass-through module.

Here is a document which explains the FLEX-10
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01608922/c01608922.pdf
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JKytsi
Honored Contributor

Re: Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter

As a new user to forums remember to assign point to answers people provide to YOU. You can rate answers (how helpfull they were) by assigning points 0-10.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Ariel Cidro
Occasional Contributor

Re: Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter

Thanks Jarkko. My first impression of flex-10 is that it have replaced the embedded Gigabit network adapters on the G6 server.