HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Embedded flex-10 ,adding a mezzanine card and four vc module 1-4

 
WilliamSmith11
Super Advisor

Embedded flex-10 ,adding a mezzanine card and four vc module 1-4

Hi

I want to know how many LOM can I get with the embedded flex-10 card in a blade bl460 g6 / g7 and adding a flex-10 mezzanine card and four vc modules (interconnect bay 1 to 4).

 

Thank you

Williams,

rperez
2 REPLIES
Psychonaut
Respected Contributor

Re: Embedded flex-10 ,adding a mezzanine card and four vc module 1-4

Technically 2 LOM's as that doesn't change with the mez cards.  But up to 16 FlexNic's depending on how you configure them.

WilliamSmith11
Super Advisor

Re: Embedded flex-10 ,adding a mezzanine card and four vc module 1-4