HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Error on my bl server

 
JimKali
Advisor

Error on my bl server

I have the following error on my blades

VOLTAGE_DEGRADES_TO_NON_RECOVERABLE

Log Entry 326: 17 Sep 2008 17:44:34
Alert Level 7: Fatal
Keyword: SHUTDOWN_OR_RESET_ON_SENSOR
System shut down or reset caused by sensor reading
Logged by: Baseboard Management Controller;
Sensor: System Event - 1.8V Sys Board
Data2: OEM Code2: 0x63
0x2048D14202021FE0 6300A87063120300


Log Entry 325: 17 Sep 2008 17:44:34
Alert Level 5: Critical
Keyword: VOLTAGE_DEGRADES_TO_NON_RECOVERABLE
Voltage degraded to non-recoverable level - Check all boards with this voltage.
Logged by: Baseboard Management Controller;
Sensor: Voltage - 1.8V Sys Board
Data1: transition to Non-recoverable from less severe
0x2048D14202021FD0 FFFF030763020300

17 Sep 2008 16:19:09
3271 OA 0 *3 0x56801CF000E01D30 0000000000000000 POWERON_DENIED_BUSY_ERRO
17 Sep 2008 16:19:09
3270 BMC *5 0x2048D12DFD021D20 0F02056F00090300 POWER_SOFT_FAILURE
17 Sep 2008 16:19:09

The server is currently down...

Internal Health & Server Health LED's are blinking RED.
3 REPLIES
Tim Nelson
Honored Contributor

Re: Error on my bl server

First guess.

You lost a power supply or other power controling component.

Phone HP support for repair.

Torsten.
Acclaimed Contributor

Re: Error on my bl server

BL860c server?

Sounds like a hardware problem with the system board.

Call HP support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JimKali
Advisor

Re: Error on my bl server

A reboot of the server sloved the issue