BladeSystem - General
1748201 Members
2976 Online
108759 Solutions
New Discussion юеВ

Re: F-GBE2 Interconnect Blade switches

 
MMC_2
Frequent Advisor

F-GBE2 Interconnect Blade switches

Hi there,

I have just installed a pair of F-GBE2 switches into a blade enclosure and I am attempting to access the ISCLI. Neither of the documented commands work:

Boot Options# mode iscli

or

Main# boot/mode iscli

On entering either the "mode" portion is not recognized?

Can someone tell me what I am doing wrong here?

Serial: A587A13BFTZC8D
H/W: 336181-004

Thanks
3 REPLIES 3
Dave Thomson
Super Advisor

Re: F-GBE2 Interconnect Blade switches

Hello mmc

What is the iscli ?

Im going to configure our 1 switch today, ill have a look.

What are your trying to set exactly ?

Cheers
Jeff Allen_5
Valued Contributor

Re: F-GBE2 Interconnect Blade switches

ISCLI is the Industry Standard CLI - a Cisco look-alike interface into the GbE2 switch. I assume you are unable to use it because you don't have the latest GbE2 firmware. I believe it was introduced in 3.0.
Dave Thomson
Super Advisor

Re: F-GBE2 Interconnect Blade switches

Hi

Ive looked around and the firmware is only on ver 2.0

We had no issues with our switch's setup.

Will be upgrading the firmware to 1.1 and then 2.0 today. A few links in the web gui dont work, im hoping this will solve it.

Cheers