HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmwareupgrade VC-FC Module fail

 
ssiegmund_1
Advisor

Firmwareupgrade VC-FC Module fail

Hallo,

I have upgrade the VC-Enet module to V3.10, woks fine.
But the VC-FC Modul are incompatible in the VC-Manager and I cannot update this with vcsu.
Error "Modul information not avaible"
Now the VC-FC Module doesnt logged in the Fabric.
The VC-FC Modul have FW 1.40
9 REPLIES
JKytsi
Honored Contributor

Re: Firmwareupgrade VC-FC Module fail

Update fw from same subnet as the modules (or without firewalls/routing between).

Try rebooting the module to get it identified again, if that does not help reseat module and try FW upgrade with vcsu again.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
MAH_2
Regular Advisor

Re: Firmwareupgrade VC-FC Module fail

I faced the issue with VC-FC module firmware upgrade.
If u upgrade from FTP server it will fail.
So please try from other server.
Also try to reset the modules.


ssiegmund_1
Advisor

Re: Firmwareupgrade VC-FC Module fail

Okay I will try this again in the same Subnet.
But I dont understand FTP Server. Where is the FTP Server. I upgrade with vcsu 1.51 Utility.
MAH_2
Regular Advisor

Re: Firmwareupgrade VC-FC Module fail

I mean if u r upgrading the VC-FC firmware from the server , where FTP service is installed may fail the upgrade.......
JKytsi
Honored Contributor

Re: Firmwareupgrade VC-FC Module fail

FC modules are updated with FTP protocol even with vcsu.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Frank Gessner
Frequent Advisor

Re: Firmwareupgrade VC-FC Module fail

I ran in that problem last week connected directly with my laptop to OA. Disabling the
firewall on my laptop solved the problem.
ssiegmund_1
Advisor

Re: Firmwareupgrade VC-FC Module fail

Hallo,
I resolved the problem. With vcutil V1.3 the FW Update works fine.
JKytsi
Honored Contributor

Re: Firmwareupgrade VC-FC Module fail

1.3 ? That pretty old with does not even support current FW releases.... Try 1.5.1 instead.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Peter Boel
Occasional Visitor

Re: Firmwareupgrade VC-FC Module fail

I have the same issue, will try tomorrow from same subnet and / or laptop direct to the OA