HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Flex-10 10gb-port to Cisco 6509

 
Armando Gil
Occasional Visitor

Flex-10 10gb-port to Cisco 6509

Can I connect the 10gig port on the flex 10 to 6509? Here are the 6509 modules:

Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
2 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC
3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B
6 2 Supervisor Engine 720 (Cold) WS-SUP720-3B
7 1 Application Control Engine Module ACE10-6500-K9
8 1 Application Control Engine Module ACE10-6500-K9
9 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX

1 REPLY
HEM_2
Honored Contributor

Re: Flex-10 10gb-port to Cisco 6509

doesn't look like you have any 10Gb ports on your Cisco switch.

You can install some 1Gb RJ45 SFP's in the Flex-10 and connect via 1Gb to your Cisco modules.

Part Number:
HP BladeSystem 1Gb RJ-45 SFP Opt Kit
453154-B21