BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Flex 10 on a 5300 procure switch

Dlink7
Occasional Visitor

Flex 10 on a 5300 procure switch

Hello

We can't seem to get our flex 10 connected to our core procure 5300 switches. It connects fine to our to our San switches procure 2900. We have lacp turned on for the cx-4 connection back to the core. In the flex manager it never says connected. Is this because how cx-4module is built? Right Now I have 100,000 of equipment would like to get going. Please any suggestions would help.
2 REPLIES
JKytsi
Honored Contributor

Re: Flex 10 on a 5300 procure switch

Could You specify the LACP and cx-4 connections. You have only one CX-4 in flex-10
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
HEM_2
Honored Contributor

Re: Flex 10 on a 5300 procure switch

In Flex-10, the X1 uplink port is shared between the CX-4 connector and the leftmost SFP+ slot.

If you have an SFP installed in the leftmost SFP+ slot then the CX-4 connection will be disabled.