BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Flex-10 only see 2 network connections on server profile

SOLVED
Go to solution
JL Martinez
Advisor

Flex-10 only see 2 network connections on server profile

I've recently purchased a new C7000 with 2 Flex-10 Ehernet modules and several BL460c G6. I'm new to Flex-10, but according to the documentation I should see 8 network connections to assign in the server profile. I only see LOM:1-a and LOM:2-a, the rest is missing. I know BL460c G6 comes with Flex-10 LOM so, did I forget something?

I've updated the VC firmware to 3.18, but no change. Any ideas?
2 REPLIES
The Brit
Honored Contributor
Solution

Re: Flex-10 only see 2 network connections on server profile

1. Open the profile.
2. Put your cursor in the "Ethernet Adaptor Connection"s box.
3. Right click
4. Select "Add Connection"

That should get you the additional connections, (one at a time).

Dave.
JL Martinez
Advisor

Re: Flex-10 only see 2 network connections on server profile

You are completely right! Silly me. I took for granted all eight connections should appear with no action on my side.

Thank you for the fast (and precise) response.