HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Flex10 Performance issue

 
jmquesadarivel
Frequent Advisor

Flex10 Performance issue

Hello,

 

data of2 Blades from different enclosures/VC network speed is good, data of 2 Blades from the same enclosure/VC is poor.

No internal networks, all 4 Flex are connected via LACP 4Gbps to 2 Stacked Cisco 3750-G.

 

How can I monitor the performance of the VC and/or can find the root cause to this network issue?

 

reagrds,

 

JQ

2 REPLIES
JD-WFH
Advisor

Re: Flex10 Performance issue

If you have an open port on one of you Flex modules, you can turn on port monitoring and check out the traffic from there. I've only recently started doing this.

Also, the monitored port LED turns blue!

jmquesadarivel
Frequent Advisor

Re: Flex10 Performance issue

thanks JD for your answer, question, have to tried this on agrregated ports (LACP ports)?