HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

GbE2c Ports and Multiple VLAN's

Ben Higginbottom
Occasional Contributor

GbE2c Ports and Multiple VLAN's

Hi All,

Due to a hardware failure were currently down to one of the above in our C7000, and due to time constraints we're using etherbonding on a BL460c to make the blade server itself part of multiple VLAN's.

However although we can see the MAC address on the switches, were currently unable to set multiple PVID's to allow it to talk to both VLAN's.

Does anyone have any pointers on how to get this to work, or even if its possible?

Many Thanks,