Getting product id of a drive from HP ilo cli

[raazresth]

Hi,

I am trying to get the product id of all of my drives in the blade through the hp ilo cli. is this even possible? It would be ideal if there was a way to dump similar info as  the iLO2 web Interface displays.

ILO version I am using 1.81   01/15/2010

the only drive info I have managed to get from the hp ilo cli is

</>hpiLO-> show system1/drives
status=0
status_tag=COMMAND COMPLETED
/system1/drives
  Targets
  Properties
    Firmware Version=1.14, enclosure addr: 224
    Bay 1 - drive status=Ok; UID=Off
    Bay 2 - drive status=Ok; UID=Off
    Bay 3 - drive status=Not Present/Not Installed; UID=Off
    Bay 4 - drive status=Not Present/Not Installed; UID=Off

but in the iLO2 Web UI I can see

Drive Bay Product Id Drive Status UID State

1 DG0300FARVV Ok Off

2 DG0300FARVV Ok Off

3 N/ANot Present/Not Installed Off

4 N/ANot Present/Not Installed Off

Thanks