HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 1/10Gb VC-Enet Module Configuration

 
SOLVED
Go to solution
John Alston_1
Occasional Contributor

HP 1/10Gb VC-Enet Module Configuration

Can the VC-Enet module uplinks be connected to multiple network segments ?? We're trying to connect to a regular ethernet segment and a backup LAN segment, with no success.

John A
1 REPLY
Lmm_1
Honored Contributor
Solution

Re: HP 1/10Gb VC-Enet Module Configuration

You should be able to do it, look at the file below, it will show some basic expamples:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01386629/c01386629.pdf


rgds,
lmm