BladeSystem - General
1748032 Members
4946 Online
108757 Solutions
New Discussion юеВ

Re: HP 460c G7 wont power on *even after firmware upgrade

 
Blade Junkie
New Member

HP 460c G7 wont power on *even after firmware upgrade

We recieved a brand new 460c G7
Upgraded the OA to 3.11 VC to latest release

I was able to power up the blade. Found that the Qlogic mezzanine card was wrong slot, put it into slot 1.

Now the server wont boot?
3 REPLIES 3
Blade Junkie
New Member

Re: HP 460c G7 wont power on *even after firmware upgrade

I've tried another slot, putting the mezz card in original slot.

No luck.
Blade Junkie
New Member

Re: HP 460c G7 wont power on *even after firmware upgrade

I've upgraded the ILO on the blades to the latest firmware, unplugged the cmos battery, reset the bay (via telnet). Removed the mezz card with no luck.

Any help would be apperciated.
RAJ GOVINDARAJ
Occasional Contributor

Re: HP 460c G7 wont power on *even after firmware upgrade

What the Virtual Connect Firmware (Ethernet & Fiber Module)? For G7 should be latest firmware above 3.15 (latest 3.17) try to update the 3.17 (3.15 have some DNS issue)