BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP BL c-Class c7000 PassThru FC causing Switch port state "faulty"

 
Stefan Holbeck
Occasional Visitor

HP BL c-Class c7000 PassThru FC causing Switch port state "faulty"

Our customer use an ED-24000B with FOS 5.2.2 and has HP BladeSystem c7000 Enclosure 412152-B21 connected through the BL c-Class c7000 PassThru FC - Module 403626-B21 with a BL c-Class Emulex FC Mezzanine (Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem) on the BL480c: Xeon 5150 Dual Core 2.67GHz/1333MHz - 4MB, 4GB (4x 1GB) Server Blade.

If the customer remove the Server Blade from that cage, the connected switch port
change the state to 'Port faulty'.
As soon the blade is back connected and online the port comes back online.

Did somebody experienced the same issue?
Is there a solution to resolve it?