BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP BL495G6 - Drive Array not Configured | No Drives Detected

Sameh_egy1
Occasional Visitor

HP BL495G6 - Drive Array not Configured | No Drives Detected

Dear all,

I have problem in my blades server ProLiant BL495c G6

1st : The Specifications:
Product Name ProLiant BL495c G6
Part Number 539807-B21
System Board Spare Part Number 488623-001
64GB*2 P\N: 461203-B21 HP
Memory 4096 MB
Smart Array P700m/256 Controller 507925-B21
Smart Array P-Series Low Profile Battery 452348-B21
Emulex LPe1105-HP 4Gb FC HBA


2nd: Needs:
Deploly Win'03 R2 64. & mirrors the contents of the disks RAID 1

3rd: problems
Drive Array not Configured | No Drives Detected


now i ask about how can i resolve this ERROR OR the solutios?

3 REPLIES
Sameh_egy1
Occasional Visitor

Re: HP BL495G6 - Drive Array not Configured | No Drives Detected

find the attached files ...
gregersenj
HPE Pro

Re: HP BL495G6 - Drive Array not Configured | No Drives Detected

Hi Sameh.

I have no experience with th BL495C.
So I have read a little aboute it.

1. Well you have got 2 internal SSD's = 2 * 64GB
The P700m is for use with the SAS switch and external storage ei the MDS600
And then you hav got the SAN option. Thats a lot of storage =)

2. Use Smart Start 8.30. It support The BL495c G6 and Windows 2003 R2 64bit.
I'm not sure if there's a RAID option on the internal drives.

3. The Smart array controller need access to some disks, in the external storage.
The SAS switch. If you have got a version 1 FW, then all servers can see all storage strait away.
If you have got ver. 2 FW it must be zoned.
If you got the MDS600. Ver 2 FW require the I/O modules to be 2.54 or newer, and it must be upgraded using ver. 1 fw. and HP SUM in debug mode.

BR
/jag

Sameh_egy1
Occasional Visitor

Re: HP BL495G6 - Drive Array not Configured | No Drives Detected

NO SUPPORT !!!!