BladeSystem - General
1748219 Members
4751 Online
108759 Solutions
New Discussion юеВ

Re: HP BL680c Power Cycling Issue

 
SOLVED
Go to solution
SYED SHAJEE WADOOD
Frequent Advisor

HP BL680c Power Cycling Issue

Hi,
recently an issue has arise at a customer site. lately the Blade server is experiencing abnormal power down. once the server goes offline. we need to pull the server out and reseat it again on the Enclosure bay otherwise it doesnt power on, physically nor through ILO. we have tested all the logs from OA. IML. Windows Event Logs.

The Firmwares are as follow:

C7000 enclosure with OA Firmware : 2.20
BL680c G5 current ROM version is 23/09/2008 upgraded last week after the initial power problem from 13/02/2008
ilo firmware version 1.70 02/12/2008.

pls assist and advice. we have recommended upgrading of OA Firmware to 2.50.

Why do we need to unplug the server n reseat the server to power on.

all help appreciated.


4 REPLIES 4
SYED SHAJEE WADOOD
Frequent Advisor

Re: HP BL680c Power Cycling Issue

Thanx Adrian,

i will go thru the necessary updates and will get back.
SYED SHAJEE WADOOD
Frequent Advisor

Re: HP BL680c Power Cycling Issue

updating Firmwares didnt help much. had to replace the system board as last resort.
SYED SHAJEE WADOOD
Frequent Advisor

Re: HP BL680c Power Cycling Issue

system board replaced