HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Best practice in deploying and configuring Proliant Blade server system

 
Server-Support
Super Advisor

HP Best practice in deploying and configuring Proliant Blade server system

Hi Folks,

 

Is there any documentation from HP which shows the steps by steps or guidelines in how to configure and setup Proliant Blade system with C7000 enclosure and the mostly hard to understand Virtual Connect modules ?

 

Please let me know where to get that from.

 

Thanks

4 REPLIES
RbBsmn
Regular Advisor

Re: HP Best practice in deploying and configuring Proliant Blade server system

Check out below link and let me know if this is what you are looking for:

http://h17007.www1.hp.com/ie/en/enterprise/servers/bladesystem/virtual-connect/index.aspx#tab=TAB3

If you are looking for any specific information, please post it here and I'll try to help out.
Did my post help? Thank me with kudo's! :)
Server-Support
Super Advisor

Re: HP Best practice in deploying and configuring Proliant Blade server system

Hi RbBsmn,

 

What I'm after is more like a step by steps guide in how to provision the HP Blades server after unboxing it and inserting it to the c7000 enclosure.

 

 

 

 

RbBsmn
Regular Advisor

Re: HP Best practice in deploying and configuring Proliant Blade server system

I will have to check for that. Will try to do that in the weekend.
Did my post help? Thank me with kudo's! :)
Server-Support
Super Advisor

Re: HP Best practice in deploying and configuring Proliant Blade server system

Hi mate,

 

is there any update for the article that you wrote over the weekend ?