BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Blade C7000/G2e Switches

 
Duster
Occasional Contributor

HP Blade C7000/G2e Switches

does anyone on this forum have any experience setting up dhcp to relay trough hp G2e switches? basically i have a dhcp server on a blade but when I activate the service for some reason the dhcp client requests doesnt get to the server on the blade chassis. ive verified that by running wireshark on the dhcp server. no firewall or access list is in effect on my core routers/switches. ive added the Ip-helper command on the core routers as well. Is there a configuration in hpGe2 switches that blocks dhcp requests?
2 REPLIES
Steven Clementi
Honored Contributor

Re: HP Blade C7000/G2e Switches

my GbE2's works just fine... pass dhcp no problems to the other blades in the chassis. No special configuration on them, straight out of the box.


Do you have any VLAN's configured? If so, do you have other server ports in different vlans? and have a scope for that vlan set up?


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Duster
Occasional Contributor

Re: HP Blade C7000/G2e Switches

let me be a bit clearer. my windows 2008 dhcp server is hosted on one of the blades. This dhcp must responding to DHCP request from clients outside of the blade on my local LAN.