HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Blade Enclosure Power

 
flex10
Occasional Contributor

HP Blade Enclosure Power

Dear Forum

Could you please advice on the power supplies on a c 7000 enclosure

We have a 16 Circuit braker, if we connect a 16 PDU and give power to each power supply, will cause any problem? please advice
2 REPLIES
JKytsi
Honored Contributor

Re: HP Blade Enclosure Power

please use bladesystem sizer tool to calculate requirements to your configuration.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JonathanT
Frequent Advisor

Re: HP Blade Enclosure Power

In our lab we ran two 20 amp 110V circuits to the C7000 for basic testing which worked fine. In production we provide two 30amp 208V circuits to the C7000. You really need to use the sizing tool and look at the amps, voltage, and redundancy that you're trying achieve.