HP Blade System Ethernet Virtual Connect Configuration issue

[A.W.R]

Hi,

We have an HP Bladesystem c7000 enclosure with 5 by BL860c and the HP Virtual connect ethernet and fibrechannel modules.

We have been configuring the virtual connect modules from the Virtual Connect wizards within Virtual Connect Console. We have v1.21 of the Virtual Connect Manager console.

When we start the network configuration wizard, we get a screen that gives us the option to use Virtual Connect assigned MAC addresses or not.

The default is to not use Virtual Connect assigned MAC addresses.

We are unable to change this and enable the option to use Virtual Connect assigned MAC addresses. Does anyone have any suggestions as to what could be causing this, and how we can enable it ?

Thanks
Andrew

[JKytsi · Accepted solution]

shut down servers and unassign profiles. after that yoy should be able to change mac settings.