BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Blade System Ethernet Virtual Connect Configuration issue

 
SOLVED
Go to solution
A.W.R
Frequent Advisor

HP Blade System Ethernet Virtual Connect Configuration issue

Hi,

We have an HP Bladesystem c7000 enclosure with 5 by BL860c and the HP Virtual connect ethernet and fibrechannel modules.

We have been configuring the virtual connect modules from the Virtual Connect wizards within Virtual Connect Console. We have v1.21 of the Virtual Connect Manager console.

When we start the network configuration wizard, we get a screen that gives us the option to use Virtual Connect assigned MAC addresses or not.

The default is to not use Virtual Connect assigned MAC addresses.

We are unable to change this and enable the option to use Virtual Connect assigned MAC addresses. Does anyone have any suggestions as to what could be causing this, and how we can enable it ?

Thanks
Andrew
1 REPLY
JKytsi
Honored Contributor
Solution

Re: HP Blade System Ethernet Virtual Connect Configuration issue

shut down servers and unassign profiles. after that yoy should be able to change mac settings.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi