BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP C3000 Blade Enclosure Error

 
Keith Garner
Occasional Visitor

HP C3000 Blade Enclosure Error

Receiving the following error when booting HP C3000 enclosure:

"Enclosure Power Event Detected"

"System Halted until Power Condition is Corrected"
5 REPLIES
JKytsi
Honored Contributor

Re: HP C3000 Blade Enclosure Error

Please provide more info.

OA firmware ?
server ILO firmware ?
Are all PSUs OK ? (green light)
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Keith Garner
Occasional Visitor

Re: HP C3000 Blade Enclosure Error

All lights on the chasis are green. The Power Limit is set to 0950 and we have it set to Redundant Power Supply. We currently have 4 blade 460s in a c3000 enclosure with 6 PDUs. We're receiving this error when attempting to boot either of the blades.
JKytsi
Honored Contributor

Re: HP C3000 Blade Enclosure Error

So you are capping the power...
Are blade BIOS and ILO up to date ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
RaulMerida
Occasional Visitor

Re: HP C3000 Blade Enclosure Error

Today, I have the same situation.
C3000 with BL260, System BIOS I20 (05/12/2009).
C3000 Firmware 2.51
Power Management Controller Version 3.4
ILO2 V1.78

Viveki
Trusted Contributor

Re: HP C3000 Blade Enclosure Error

Hi

One of your blades have an issue. Isolate it and get it replaced / repaired.