BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Enclosure C7000 SNMP Integration

BMOREL
Occasional Advisor

HP Enclosure C7000 SNMP Integration

Hi

I configured snmp trap on OA bord of the enclosure.

I performed a tcpdump on my destination server

Test Trap is sent by OA is received correctly

In order to perform additionnal test, I reset a blade, the OA.

But no trap is sent.

Is there anything else to be configured ?

How to be ensure that all alarms have been enabled on the enclosure ?

Is there any filter or access list ?

 

May thanks

Best regards

1 REPLY
Belen_HP
Occasional Advisor

Re: HP Enclosure C7000 SNMP Integration

Hi,

 

This issue seems to impact OA Firmware Version 4.0x and 4.1x. 

As recommendation, we suggest to update HP Onboard Administrator Firmware Version to 4.20 (or later).

In the meanwhile, if any SNMP configuration changes were made while the OA SNMP service was already enabled, one workaround could be disable and then re-enable the OA SNMP service 

Other workarounds could be found:

http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=1842757&docId=emr_na-c04292193 

 

Hope this helps!

 

Belén

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away  HP Support Center Knowledge-base
See Self Help Post for more details