BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP FlexFabric 20/40 F8

SOLVED
Go to solution
wiineedshelp
Occasional Visitor

HP FlexFabric 20/40 F8

Hi Everyone,

 

Does anybody know how to configure the QSFP+ port to be 4x10G? 

 

I'm trying to make my QSFP+ to 4SFP+ AOC cable to work in there and the Q1.1 say no link, the Q1.2-4 say "covered".

 

The attachment is a screen shot of the issue.  

 

 

3 REPLIES
Jimmy Vance
HPE Pro

Re: HP FlexFabric 20/40 F8

Take a look starting at page 307 in this document

 

HP Virtual Connect FlexFabric Cookbook

 

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c02616817

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
wiineedshelp
Occasional Visitor

Re: HP FlexFabric 20/40 F8

Thanks Jimmy.  So after I read the document, it's seem like the only breakout cable will work in that QSFP+ port as 4x10g is the Direct Attach Copper Splitter Cable?  

wiineedshelp
Occasional Visitor
Solution

Re: HP FlexFabric 20/40 F8

so I've replaced the AOC cable with the JG329A, it worked!  Thanks Jimmy.