HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

HP Integrity BL 860 hardware mirror problem

Frequent Advisor

HP Integrity BL 860 hardware mirror problem

Hi All,

we are facing an issue wih BL 860 Server.
I had mirroed the disks by using the "drvcfg" utility and its optimal. For checking the mirror i had removed the primary hardisk and try to rebooted throught the secondary one.But unfortunately it is not booting.

OS is HPUX 11iv3 BOE ,becuase of that am not able to do the lvm mirroring.

Can u please help me...

Thanx and rgds,
Acclaimed Contributor

Re: HP Integrity BL 860 hardware mirror problem

Please run this command from running hp-ux and post the result:

# sasmgr get_info -D /dev/sasd0 -q raid

With your server you can only do a hardware mirror *or* a LVM mirror with internal disks, never both.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!