HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant WS460c Gen8 Workstation Blade Display Adapter Issues

 
tisene
Occasional Visitor

HP ProLiant WS460c Gen8 Workstation Blade Display Adapter Issues

Hey

 

I'm setting up a HP ProLiant WS460c Gen8 Workstation Blade with 2 NVIDIA Quadro 3000M adapter. I'm logged into the machine using HP Remote Graphics Receiver.

 

The machine is running Windows 7 64bit with nView and this "Workstation Blade NVIDIA Quadro Professional Driver for Microsoft Windows 7/Vista 64bit" driver installed.

 

The problem is that the Nvidia Control Panel sees the display as analog It wont let me select a higher resolution than 1680x1050. I want to have a resolution of 1920x1200. Is it possible to change the display to digital so I can set this resolution?