HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM pass-through Authentication for ILO?

 
deceit
Advisor

HP SIM pass-through Authentication for ILO?

Hi All,

Recently comissioned 2 x c-class chassis and have installed HP SIM 5.1 SP1. Latest firmware on all devices.

I have noticed in HP SIM that the Management Processor lines are not populated with the names that have been configured in iLO.

eg: 192.168.27.162 in Server cbrep082 - the IP should really say "cbrep082-ilo"

I have noticed when clicking on any of these management IP links for the health status I am prompted with the login information of iLO.

**How can I configure HP SIM to automatically log in to iLO as a trusted source?**


Cheers
4 REPLIES
Raghuarch
Honored Contributor

Re: HP SIM pass-through Authentication for ILO?

Hi Deceit,

You can configure it in the iLO.
Select security in the left navigational tree then HPSIM SSO Tab.
Add a HPSIM server you will be able to do SSO.

Please refer to the attachment.

Regards,
Raghuarch
deceit
Advisor

Re: HP SIM pass-through Authentication for ILO?

Thank you for the response Raghuarch.

It looks like I have to use an Activation Key. So I dont get to see the same settings as you do.

See the screen shot from my License Manager within HP SIM. The Status says "Licensed but no key information available".

I am not sure if I have the appropriate licenses? But I thought they would have come with the blade/chassis... The pass through authentication works if I manage the iLO's through the HP Onboard Administrator


Thanks again for your assistance.
deceit
Advisor

Re: HP SIM pass-through Authentication for ILO?

Also here is a list of the licenses I have within HP SIM.


See Attached
Raghuarch
Honored Contributor

Re: HP SIM pass-through Authentication for ILO?

Hi Deceit,

The License that comes with the blades are not Advanced licenses.
So you need iLO2 Advanced Licenses to Do SSO from HPSIM.

I don't know any other steps.
Please post if you are able to do it without the Advanced License.

Regards,
Raghuarch