BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX 11i V2 on Bl870c

SOLVED
Go to solution
Daniel A
Advisor

HP-UX 11i V2 on Bl870c

Hi¡

I have a HP Integrity Blade BL870c Server and I want to install HP-UX 11i V2 on it, but when I run the istallation I can't see the hard disk and obtain the following message:

There were no disks found during the IO scan. You will need to
correct any hardware problems and either use the "Scan Again" button,
or reboot and try again.

Somebody can help me?

Regards
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: HP-UX 11i V2 on Bl870c

What is the release date of your install media?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Daniel A
Advisor

Re: HP-UX 11i V2 on Bl870c

Hi Torsten,

I,ve tried with HP-UX 11i V2 Enterprise Operative Environment June 2007, May 2005 and Foundation Operative Environment December 2006.

Regards