BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Virtual connect not seen in HP BladeSystem Onboard Administrator

vlpintea
Occasional Visitor

HP Virtual connect not seen in HP BladeSystem Onboard Administrator

Hello,

I have a C7000 enclosure but I cannot see HP Virtual connect  in HP BladeSystem Onboard Administrator.

I have the latest firmware.enclosure.jpg

 

Thanks

 

5 REPLIES
Torsten.
Acclaimed Contributor

Re: HP Virtual connect not seen in HP BladeSystem Onboard Administrator

First I would check in EPIBA if the modules get an IP address and point the browser directly to this address.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
vlpintea
Occasional Visitor

Re: HP Virtual connect not seen in HP BladeSystem Onboard Administrator

I'm new to this. Can you help what is EPIBA?

Thanks for the help
Torsten.
Acclaimed Contributor

Re: HP Virtual connect not seen in HP BladeSystem Onboard Administrator

Click on enclosure settings on the left, then Enclosure Bay IP Addressing (EBIPA), then interconnect bays.

 

look at current address on the right.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
vlpintea
Occasional Visitor

Re: HP Virtual connect not seen in HP BladeSystem Onboard Administrator

Found it.

Thanks for the support

Torsten.
Acclaimed Contributor

Re: HP Virtual connect not seen in HP BladeSystem Onboard Administrator

Does it work now?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!