BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HP storage works 4/8 san switch

HP storage works 4/8 san switch

Hi all,

Well, I'm facing a very strange problem with some SAN switches.

Those switches are just rebooting and can't start correctly. During boot process, the following message is show:

"Linux/PPC load:
BootROM command line: quiet
Uncompressing Linux...done.
Now booting the kernel
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
Installing Linux 2.6 Kernel
Detected previous filesystem shutdown on hda2. Starting Recovery.

Filesystem check complete.

Attempting to find a root file system on hda1...

INIT: version 2.78 booting

mount: you must specify the filesystem type

Failed to mount the secondary image

--- Cannot mount the secondary partition.
--- System is rebooting for recovery."

And after, system restarts...

Is there any FW recovery process??? But don't forget, on this switch state, I can't access any network because "enet" device can't start.

Any help?

Thanks in advance,

Jonas
1 REPLY

Re: HP storage works 4/8 san switch

I found the answer