BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE BL460c G5 is rebooted randomly

ashraf_islam
Advisor

HPE BL460c G5 is rebooted randomly

One of blade server HPE BL460c G5 is not properly power on. It's randomly rebooted and also don't show BIOS screen.

I have reinsert the server, RAM, Processor but same result. From iLO it shows an error "Power loss due to overheating. Attempting to restore power". But room temperature is 18 degree. All other blade server in enclosure is functioning properly.  I also reset E-Fuse from OA command line using "reset server 2".

All attempt is gone to hell.

Any solution from expert end.

 

 

 

1 REPLY
FabioC1
HPE Pro

Re: HPE BL460c G5 is rebooted randomly

Hi  ashraf_islam 

 

Try to do - NVRAM - https://support.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0106034

 

regards

FabioC1 - HPE Pro

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.